Skip to main content

WeDo sensors and NXT

The LEGO WeDO set - discussed in previous posts - was made for the classroom, but it comes with two little sensors that can be used in NXT robots too. The set includes a tilt sensor as well as a proximity sensor. With a converter cable, it is possible to read the sensors using the NXT brick.

The video below illustrates the two sensors. Based on the (analog) sensor value, a tone is played. The signal from the tilt sensor is rather discrete - it only tells you wether it points up, down, left, right or wether it is held parallel to the ground.

The proximity sensor responses to changes in relative distance quite fast, making it a good solution for movement detection



Here's a diagram of the converter cable by Daniel Wittenaar (MCP):








Caution: Do not use this cable to connect a battery pack to your NXT. This will damage your NXT instantly.

Other than that, you can safely use this cable to connect PF sensors and Motors to the NXT.

Popular posts from this blog

MINDSTORMS Retires!

2023 is the 25th Anniversary of the MINDSTORMS brand. For 25 years, MINDSTORMS has educated and inspired a generation of robot builders, both children and adults. Unfortunately, the LEGO Group decided to end the line on December 2022. Many ROBOTMAK3RS have been passionately involved with the development of MINDSTORMS through the MUP and MCP programs. Even with the newest Robot Inventor line, several ROBOTMAK3RS were invited to submit additional bonus models that were included in the official app. Regardless of the retirement of a major LEGO robotics product line, ROBOTMAK3RS continue to MAKE-SHARE-INSPIRE using all LEGO robotics platforms available to us. Here is the official statement from LEGO. Since its launch in September 1998, LEGO MINDSTORMS has been one of the core ‘Build & Code’ experiences in the company’s portfolio, carrying with it significant brand equity and becoming a stand-out experience for the early days of consumer robotics and leading to current Build & Code

Celebrating MINDSTORMS with a Remix Part 1

In honor of the 25th Anniversary of MINDSTORMS, we asked ROBOTMAK3RS to combine a LEGO set of their choice with a MINDSTORMS set. Here is what these five ROBOTMAK3RS came up with.  MINDSTORMS Chess Assistant by Arvind Seshan Overview: When you are new to chess, it can be a challenge to remember which pieces go where. Now, you can use machine learning and LEGO MINDSTORMS Robot Inventor to build a tool to help you learn where all the chess pieces go on the chess board. Sets used: LEGO® Iconic Chess Set (40174) and MINDSTORMS Robot Inventor (51515) Review: I really like how the chess set base can store all the pieces underneath and that the board neatly splits in half for handy storage. The chess pieces themselves are very sturdy and well built. My only criticism is the building of the box itself. It was quite difficult to see what pieces to use and since the entire box is made mostly of thin plates, it took a lot of time and patience. I would have liked the storage area to be sliding dra

Celebrating 25 Years of MINDSTORMS

In celebration of the 25th Anniversary of MINDSTORMS, we take a trip through history. Please also visit ROBOTMAK3RS Community every week as we highlight different projects all through 2023 in celebration of the anniversary. Some of the early history is based on the content shared by  Coder Shah  in our  MINDSTORMS EV3 Community Group . Some of the text and links may have been edited from his original posts for consistency and clarity.  1984 - Kjeld Kirk Kristiansen watched a TV program called "Talking Turtle," where MIT professor Seymour Papert demonstrated how children could control robot "turtles" using LOGO, a programming language he developed. 1988 - The collaboration between MIT and LEGO resulted in LEGO TC Logo in 1988, which allowed students to control LEGO models using computer commands. The video shows Papert demonstrating TC Logo. 1990 - LEGO TC Logo was hampered since the robots you built had to be tethered to a personal computer. LEGO and MIT